Generator Fuel Consumption Calculator
Fuel math is division, not vibes. Enter your burn rate from the generator manual and what you have stored. For load-specific planning, start with our generator sizing guide.
Your setup
From your manual, e.g. ~0.5 gal/hr at half load for a 3500W inverter. No manual? Size it first, then come back.
Runtime
- Fuel on hand
- 5.0 gal
- Runtime
- 10.0 hours
- 72-hour need
- 36.0 gal
- Shortfall
- 31.0 gal
Close the gap
- Flame King 20-lb propane tank — the standard refillable unit
- Midwest Can 5-gal gas can — stackable gasoline storage
- STA-BIL stabilizer — stored gas goes stale in months without it
- WEN 56360i inverter generator — if you are sizing before buying
Fuel questions
How long will a 20-lb propane tank run a generator?
Divide 4.6 gallons by your burn rate. At 0.5 gal/hr that is about 9 hours; at 1 gal/hr about 4.5 hours. Enter your manual figure above for your exact number.
How much fuel for a 3-day outage?
Multiply burn rate by 72. A 3500W inverter at half load (~0.5 gal/hr) needs about 36 gallons: seven 5-gal cans with stabilizer, or eight 20-lb propane tanks.
Does gasoline go bad in storage?
Yes, in 3-6 months untreated. Dose every can with stabilizer at fill time and rotate yearly.
How this is calculated
Runtime (hours) = fuel on hand (gal) / burn rate (gal/hr). A 20-lb propane tank holds ~4.6 gal; gasoline stores in 5-gal cans dosed with stabilizer. No generic consumption figures are used: your manual's burn rate at your load is the only honest input.
20-lb propane tank runtime at common burn rates
| Burn rate (gal/hr) | One 20-lb tank (4.6 gal) | 72-hr need (gal) |
|---|---|---|
| 0.3 (light load) | 15.3 hrs | 21.6 |
| 0.5 (half load) | 9.2 hrs | 36.0 |
| 1.0 (heavy load) | 4.6 hrs | 72.0 |